Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sandston, VA
Richmond Gate Repair is a gate-only specialist serving Sandston, VA, and most of the work here starts with a driveway gate that was built for a different era. Sandston grew up around Richmond International Airport, so plenty of homes in 23150 sit on generous mid-century lots where the original welded chain-link or tube-steel swing gate is still doing the job – often with posts set in concrete that has heaved, rusted, and drifted out of plumb. That shapes what we do most in Sandston: re-hanging and rebuilding older gates, sorting out tired electric operators, and installing new gates that suit the lot instead of fighting it. Call (866) 942-6565 for a free estimate.
Why Sandston Homes Are Different
Sandston’s housing stock runs heavy on 1940s – 1970s single-story brick and block ranch homes on large lots, with scattered older farmhouse properties mixed in. Those lots were made for a driveway gate, and many still carry the original one. Original welded chain-link and tube-steel swing gates here tend to have posts that were set in concrete decades ago, and that concrete has heaved and rusted in place, which is why so many swing gates in Sandston sag at the latch end or drag on the driveway.
The climate does the rest. Central Virginia’s humid subtropical pattern brings hot, humid summers, freeze-thaw winters, and heavy spring thunderstorms. Steel gates and hinges rust fast in that cycle, and the same freeze-thaw that cracks a driveway pushes a gate post out of plumb a little more every year. Because Sandston sits directly under the approach to Richmond International Airport, exterior hardware along the airport-adjacent streets also picks up galvanic corrosion from jet-exhaust fallout and storm runoff. On older chain-link gates, that corrosion is usually the difference between a re-hang and a full replacement.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Sandston Services
Two jobs come up again and again on Sandston driveways: getting an older gate working properly again, and putting in a new one that’s built for the lot. Here’s what each involves.
Gate Repair in Sandston
Most repair calls in Sandston land on a manual swing gate: a sagging panel, a latch that won’t catch, a hinge that’s seized from rust, or a post that has shifted out of plumb. We look at the post footing and the gate frame first, because in this housing stock the failure usually starts there rather than at the latch. The freeze-thaw cycle and heavy spring storms are what keep pulling posts out of line. If your gate needs work, start with gate repair and we’ll tell you plainly whether it needs a re-hang or a rebuild. Call (866) 942-6565 for a free estimate.

Electric Gate Repair in Sandston
When a gate has an operator on it, the fault can sit anywhere from the control board to the motor to the safety loops, and that’s the part general contractors and fence crews usually won’t touch. We diagnose boards, loop detectors, and motor failures on the systems Sandston homeowners already own. Galvanic corrosion from airport-adjacent fallout shows up on exterior switches and wiring connections here more than people expect, so we check the hardware as carefully as the electronics. For automated systems, see electric gate repair. Call (866) 942-6565 for a free estimate.

Gate Installation in Sandston
Gate installation in Sandston starts with the lot, and the lot usually tells us what kind of build it needs. Large postwar parcels in 23150 give you room for a proper swing gate or a sliding gate, but posts set in old, heaved concrete mean a new gate is only as good as the footing beneath it. We handle Gate Installation from the first measure and design conversation through the final operational test, so the footing, the frame, the operator, and the safety edges all get worked out together instead of piece by piece. In a humid subtropical climate with freeze-thaw winters, getting the footing right the first time is what keeps a new gate swinging true through the seasons.
Driveway Gate Installation
Signs you need it
Your current driveway gate is a rusted-out chain-link or tube-steel panel on a post that has heaved past the point of a safe re-hang, or you’ve never had a gate on a large lot that clearly wants one.
What it costs in Sandston
A typical driveway gate installation in Sandston is estimated at $2,500 to $6,500, depending on span, material, and whether an operator is included, with the written estimate setting the final price.
How we do it
We measure the opening, set new posts to proper footing depth, hang and align the gate leaf, and test the latch and swing before we call it done.
Automatic Gate Installation
Signs you need it
You want to stop getting out of the car to open and close a driveway gate, or your existing manual gate has reached the size and weight where a proper operator makes the daily routine easier.
What it costs in Sandston
Automatic gate installation in Sandston typically runs $3,500 to $6,500, and a new gate paired with a new operator is estimated at $4,000 to $8,500, with the written estimate setting the final price.
How we do it
We plan the operator and safety-edge layout with the gate build, mount and wire the operator, set the safety edges and any loop detectors, then test every cycle and adjustment before handover.
What Gate Installation Costs in Sandston
| Item | Typical range in Sandston |
|---|---|
| Manual driveway gate installation | $2,500 – $6,500 |
| Automatic gate installation (operator included) | $3,500 – $6,500 |
| New gate plus new operator | $4,000 – $8,500 |
Every figure above is an estimate, and the price is quoted and agreed in writing before any work starts. The written estimate sets the final price, so there are no surprises after the gate is up.
Do I need a permit to install a gate in Sandston?
That depends on what you’re building and where it sits, so check with the city’s building department before work begins. We walk through the layout with you so you know what to ask about, and we schedule installations in advance rather than same-day.
Can you match a new gate to an older Sandston lot?
Yes. Large postwar lots in Sandston often allow a wider driveway gate or a slide gate than the original chain-link panel used, and we size the new gate and operator to the actual opening and footing conditions on your property.
Brands We Service in Sandston
We work on the systems Sandston homeowners already own, including LiftMaster, DoorKing, Elite, and Mighty Mule, plus the other major operators. Our technicians have up to 12 years of experience, and we arrive familiar with each brand’s quirks, which shortens diagnosis and reduces return visits. Parts are ordered per job. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sandston, VA
| Service | Typical range in Sandston |
|---|---|
| Manual driveway gate installation | $2,500 – $6,500 |
| Automatic gate installation (operator included) | $3,500 – $6,500 |
| New gate plus new operator | $4,000 – $8,500 |
| New operator on an existing gate | $1,800 – $4,000 |
| Gate repair (general) | $150 – $1,200 |
| Gate repair with new posts | $350 – $1,000 |
| Gate re-hang | $150 – $300 |
| Electric gate repair | $150 – $1,200 |
In Sandston, two things push the number up: heavyweight or custom panels, and posts that need new footings because the old concrete has heaved. Everything is quoted and agreed before any work starts, so the written estimate is the final price.
Neighborhoods We Serve in Sandston
We serve homeowners and property managers across Sandston and the streets around Richmond International Airport. Because so many properties here are older ranches and farmstead lots with original welded gates, the work skews toward re-hangs, post correction, and replacements that fit the existing driveway rather than decorative new builds. We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. Typical Sandston neighborhoods we cover include:
- Airport-adjacent streets in 23150
- Mid-century ranch subdivisions off Williamsburg Road
- Older farmstead properties on the outskirts of town
- Lots along the Route 60 corridor
Service Area – Cities Near Sandston
Sandston sits close to several communities we serve regularly, and the same humid, freeze-thaw conditions affect gate hardware across the area. If you’re just outside Sandston, we cover Highland Springs, VA, East Highland Park, VA, Montrose, VA, and Mechanicsville, VA. Call (866) 942-6565 to confirm coverage for your address.
Serving Sandston, VA – Our Local Coverage Area
We serve Sandston and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sandston
We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday, with same-day service available on repairs. Installation work is measured, ordered, and scheduled rather than same-day. Call (866) 942-6565 for a free estimate.
Some do and some don’t, depending on the gate’s size, height, and placement, so check with the city’s building department and your HOA before work begins. We’ll walk you through the layout so you know what to ask about.
We cover all of Sandston, including 23150 and the airport-adjacent streets, plus the nearby communities listed above. If you’re unsure whether your address is in range, call (866) 942-6565 and we’ll confirm before booking.
If your gate won’t open, won’t close, or was never installed right, we’re the gate-only team to call in Sandston. From the control board to the hinge, we diagnose, repair, and install across nine major brands and both manual and electric systems. Call (866) 942-6565 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts, and the written estimate sets the final price.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Sandston Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Whitney Bennett"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Nathan Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Keisha Hampton