Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rockwood, VA
Gate installation in Rockwood usually starts with a long driveway and a wide entrance, not a tight city lot. Lots out here along the Route 60 corridor sit on acreage or large suburban parcels, so a properly sized double gate or a smooth-sliding driveway gate needs a footing, a power plan and a real measurement before anyone orders hardware. Central Virginia’s humid summers and freeze-thaw winters work on wooden frames and metal hinges year after year, which is why we size and hang gates for the climate, not just the photo. As a gate-only specialist, we handle Richmond Gate Repair work from first measurement to the final open-and-close test. Call (866) 942-6565 for a free estimate.
Why Rockwood Homes Are Different
Rockwood sits in Chesterfield County’s Route 60 corridor just west of Richmond. That single fact changes almost everything about a gate job. The county, not the City of Richmond, sets the permit and inspection rules here, so setbacks and electrical standards follow Chesterfield’s code rather than the city’s. We plan around that before we quote. Properties often border wooded acreage or small horse pastures, which means wind, dropping limbs and drainage all affect where a gate can sit and how its footing is built.
The housing stock runs mostly 1970s to 2000s suburban single-family homes on generous lots, many with custom driveway gates, pool enclosures, and split-rail or privacy fencing. Older properties sometimes carry original wrought-iron or wooden gates that need hinge rebuilds rather than replacement. The climate adds its own pressure: humid summers swell wooden gates, freeze-thaw winters stiffen metal hinges, and late-summer derechos and nor’easters knock mature pines and oaks down along Route 60. A repair here often begins with clearing a fallen limb that has bent the frame or sheared the operator arm.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Rockwood Services
Two jobs come up on almost every Rockwood call: a gate that has stopped working, and an electric system that has stopped responding. Both are covered by dedicated gate technicians.
Gate Repair in Rockwood
Manual and mechanical gate repair in Rockwood is mostly about the parts the climate attacks. Wooden leaves swell in July and August, hinges stiffen through freeze-thaw winters, and latches stop lining up as posts settle. We rebuild hinges rather than sell a replacement gate when the frame is still sound, and we reset posts to proper footing depth so the swing stays true. When a storm drops a pine across an entrance along Route 60, we start by straightening or replacing a bent frame and checking the operator arm for shear. From the control board to the hinge, that work is our only focus. For the full breakdown, see Gate Repair in Rockwood.

Electric Gate Repair in Rockwood
Electric gate repair in Rockwood reaches past the mechanics. A gate that opens halfway, reverses for no reason, or ignores the remote usually has a control board, loop detector, intercom integration or motor problem, and those are the failures general contractors hand off. We diagnose the operator itself, not just the gate. Summer thunderstorms and occasional ice storms are the main cause of opener failures and impact damage here, and we trace the fault from the board outward: power, then safety edges, then the motor. We work on LiftMaster, DoorKing and other major systems. Details are on Electric Gate Repair in Rockwood.

Gate Installation in Rockwood
Gate installation in Rockwood is a measurement-and-footing job before it is a hardware job. Because so many entrances here serve long driveways on acreage or wide suburban lots, the gate has to fit a specific opening, clear a specific grade and meet Chesterfield County’s permit rules rather than the City of Richmond’s. We treat gate installation as a full process: on-site measure, footing, power plan, hanging, then a final open-and-close test with every safety device checked.
Climate decides a lot of the details. A wooden gate hung tight in a dry week will bind once humid summer air swells the leaves, so we hang with seasonal movement in mind and set hinges and posts to hold through freeze-thaw winters. Where a driveway borders wooded acreage, we plan the swing or slide path so fallen limbs and storm debris are less likely to jam the gate or shear an operator arm. Because we install and repair the same systems, the gate we hang is the gate we can service later.
Automatic Gate Installation
Signs you need it
You want the entrance to open from a vehicle without leaving the car, or you’re replacing a tired operator that no longer holds up to storm-season use.
What it costs in Rockwood
A full automatic gate installation typically runs from about $3,500 to $12,000, depending on gate size, material and the operator, with the written estimate setting the final price.
How we do it
We measure the opening and grade, confirm the Chesterfield permit path and power source, set footings to proper depth, hang the gate, mount and program the operator, then test every safety edge and loop before we leave.
Driveway Gate Installation
Signs you need it
Your driveway is long or wide enough that an open entrance feels exposed, or the existing gate is too small or too worn to secure the property.
What it costs in Rockwood
Driveway gate installation typically ranges from about $2,200 to $9,000, depending on material, width and whether an operator is added, with the written estimate setting the final price.
How we do it
We lay out the opening against the driveway and setback, build footings that hold through freeze-thaw, hang a double or single gate sized to the span, and confirm the swing clears the grade across the full arc.
What Gate Installation Costs in Rockwood
These typical ranges cover the common configurations we see on Rockwood driveways. Every job is priced per estimate after we measure.
| Item | Typical range in Rockwood |
|---|---|
| Driveway gate installation | $2,200 – $9,000 |
| Automatic gate installation | $3,500 – $12,000 |
| Sliding gate installation | $3,000 – $10,000 |
Do I need a permit for a new gate in Rockwood?
Usually yes, and it’s Chesterfield County you ask, not the City of Richmond. Setback and electrical rules apply to most new gate and operator installations here, so confirm with the county building department before ordering hardware.
Can you install a gate to match my existing fence?
Yes. We measure your existing fence line and match material, height and finish so the new gate sits as part of the same run. Call (866) 942-6565 for a free on-site measure and a written price.
Brands We Service in Rockwood
We work on LiftMaster, DoorKing, Elite and Mighty Mule systems, along with FAAC, BFT, Linear, Viking and Ghost Controls, so we recognize your operator on sight rather than looking it up. Our technicians have up to 12 years of experience, which shortens diagnosis. We don’t stock parts locally, so turnaround depends on the part; see our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rockwood, VA
The ranges below are typical for Rockwood work and are estimates only. The written estimate you receive after we look at the gate sets the final price.
| Service | Typical range in Rockwood |
|---|---|
| Driveway gate installation | $2,200 – $9,000 |
| Automatic gate installation | $3,500 – $12,000 |
| Sliding gate installation | $3,000 – $10,000 |
| Gate repair (hinge, latch, frame) | $150 – $600 |
| Electric gate repair (operator, board, motor) | $250 – $1,200 |
| Operator or motor replacement | $600 – $1,800 |
| Control board or loop detector repair | $250 – $900 |
What pushes price up in Rockwood is usually footing depth, the grade across a long driveway, and whether a power run is needed to reach the operator. Material choice matters too: a wide double gate in a heavier metal costs more than a single wooden leaf. We quote and agree the price before any work starts, so the number you approve is the number on the invoice.
Neighborhoods We Serve in Rockwood
We cover gate installation, repair and electric work across Rockwood and the surrounding Chesterfield County stretch of Route 60. Because the area spreads out along wooded acreage and larger suburban lots, we book on-site estimates with the drive time in mind and confirm the window when you call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Route 60 corridor properties west of Richmond
- Acreage and horse-pasture entrances bordering wooded land
- Established 1970s – 2000s subdivisions with custom driveway gates
- Homes with pool enclosures and split-rail or privacy fencing
Service Area – Cities Near Rockwood
Rockwood work often spills into the neighboring communities we cover. We handle gate installation and repair for homeowners in Bon Air, VA and Manchester, VA, both close enough that the same Chesterfield-area conditions apply. Farther out, we serve Midlothian, VA and Bensley, VA as well. Wherever your gate sits in this stretch of Central Virginia, the routine is the same: measure on site, quote in writing, and confirm the price before work begins. Call (866) 942-6565 to book a free estimate.
Serving Rockwood, VA – Our Local Coverage Area
We serve Rockwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rockwood
Repair calls are usually booked same-day where the schedule allows, and on-site estimates are set at the time you call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and a call outside dispatch hours is booked into the next opening.
For most new gate and electric operator installations, yes. Chesterfield County sets the permit and inspection rules here rather than the City of Richmond, so ask the county building department about setbacks and electrical requirements before you order hardware.
Yes. We cover Rockwood and the surrounding Chesterfield County stretch of Route 60, plus Bon Air, Manchester, Midlothian and Bensley. If you’re unsure whether your address is in range, call (866) 942-6565 and we’ll confirm before booking.
Whether your gate won’t open, won’t close, or was never installed right, we can help. Call (866) 942-6565 for a free estimate and a written price agreed before any work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Rockwood Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Whitney Bennett"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Nathan Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Keisha Hampton